TapRite Brass Soda Carbonation System CO2 Regulator w/ Wrench 1800# 0-160 PSI

Description

This is a used, but working, Tap-Rite 3740 Series brass CO2 regulator and steel wrench, as shown in the first photo.
It's setup for soda with a higher range (0-160 PSI) valve and a flare fitting output. As it is now, with the the higher range (0-160), you wouldn't have as much control over the output as if you installed a 0-50 PSI valve, so it may not be ideal for draft beer, though it still should work for soda or beer.
The second photo shows it hooked up to a tank for testing. No tank or hoses are included.
It was used to in a closed concession business for soda. I hooked it up to a corney keg and pressurized some sparkling water at home to test it and it worked as expected.
I also sprayed soapy water on the connects and I put new Teflon on one connection and a new rubber washer on the tank connection and it did not leak in my test.
A steel wrench that can remain mounted on the regulator for quick install / removal will be included, as shown in the photos.
The sticker on the front lists it as a 1,800 PSI max on the inlet and the the high side valve is rated at 2,000 PSI max.
I adjusted the low side pressure screw up and down and it adjusted as expected.
I already have a regulator, so I'm selling this one.
Free Shipping
Shipping is free to the 50 US and territories
via US Post Office Priority mail (2-3 days in transit; based on location).
Orders paid
before noon Eastern Time (Monday-Saturday) will ship out the same day
, excluding Sunday or post office holidays.
Nothing ships on Sunday or during post office holidays. All such orders will ship the day the carrier re-opens.
Free US Returns
If you have an issue, then
we'll pay for return shipping
as needed.
We'll refund the full purchase amount
as long as everything is returned in its original condition.