Angle grinder with collet - PWSA 5/210 HV - Pferd

Description

PNEUMATIC GRINDERS
ANGLE GRINDER WITH COLLET
PWSA 5/210 HV
Technical information
RPM from
21000 RPM
Power output range from
370 watts
Exhaust direction
rear
Throttle type
lever
Air consumption at idle
0.85 m³/min
Air consumption under load
0.6 m³/min
Collet group
6
Air supply hose inner dia.
8 mm
Weight [kg]
0.71
Elastically mounted spindles
without
Support
without
Material number
80209010
Description
Special features:
Low angle head height.
Included in delivery:
0.75 m exhaust hose and 2 m air supply hose without nozzle, 6 mm collet, 2 keys.
Classification
profi class 5.0
AAC393c006
eclass 8.1
21060107
eclass 7.0
21060107
eclass 4.1
21060101
Suitable PFERD tools
Catalogue section 2
TC burrs
Cut 3, 3 PLUS, 4, 5, STEEL, INOX, NON-FERROUS, CAST, TOUGH, TOUGH-S, MICRO, ALLROUND, TITANIUM
Dia. 6 to 12 mm
Cut 1, ALU, FVK, FVKS, PLAST
Dia. 10 to 16 mm
HSS rotary cutters
Cut 1, 2, 3, 5, special cuts
Dia. up to 5 mm
Catalogue section 3*
Mounted points
Shank diameter of 6 mm:
Dia. up to 16 mm
Dia. 16 to 32 mm
Width ≤ 32 mm
32 to 40 mm diameter
Width ≤ 20 mm
Shank diameter of 8 mm:
Dia. up to 16 mm
Dia. 16 to 32 mm
Width ≤ 32 mm
Catalogue section 4*
Poliflex fine grinding points
Bonds:
GR, PUR
Dia. up to 12 mm
GHR, LR, TX, LHR
Dia. up to 25 mm
Abrasive spiral bands and rubber drum holders
Dia. up to 22 mm
POLICAP
Dia. up to 11 mm
Mounted flap wheel
Dia. up to 20 mm
POLINOX unitized wheels PNER
Dia. 25 mm
COMBIDISC abrasive discs
Dia. 20 to 38 mm
Catalogue section 5
Diamond grinding points
Dia. 7.0 to 15.0 mm
CBN grinding points
Dia. 14.0 to 20.0 mm
Diamond cut-off wheels
Dia. 30 to 50 mm
matching
ArborsBO 6/10 3BO 8/10 3
or
adapter setSAS 10/50
Catalogue section 6
Cut-off wheels EHT
Dia. up to 40 mm
matching
Arbors
BO 6/10 0-4BO SPG 6/6 0-10
Dia. up to 50 mm
matching
Arbors
or
adapter set
SAS 10/50
matching
adapter setSAS 10/50
Ring wheels ER
Dia. 50 mm
matching
adapter setSAS 10/50
Catalogue section 6
Dia. up to 40 mm
matching
Arbors
BO 6/6 3-10BO SPG 6/6 0-10
Dia. up to 50 mm
matching
Arbors
BO SPG 6/6 0-10BO SPG 6/10 0-10
or
adapter set
SAS 10/50
If no shank diameter is given, the shank dia. of 6 mm applies.
*Catalogue sections 3/4: This data applies to an unsupported shank length of 10 mm and the max. stated mounted point dimensions.Note: Please observe the recommended cutting speeds and the max. permitted rotational speeds in catalogue sections 2-8.
https://www.pferd.com/int-en/products/tool-drives/pneumatic-grinders/angle-grinder-with-collet/pwsa-5-210-hv/pwsa-5-210-hv/